Mohammad Ameri

Professor

Update: 2025-11-21

Mohammad Ameri

Mechanical and Energy Systems Engineering /

Master Theses

  1. Numerical Investigation of Natural Convection Heat Transfer for MHD Fluid in Hexagonal Cavity with Circular Internal Obstacles Using Finite Element Method
    Mohammad Dehghan Afifi 2025
  2. Study on the annular flow of non-newtonian fluid in a pipe with a valve
    Mohammadreza Karimi 2025
  3. Feasibility of ambient air vaporizer for a moving nitrogen capsule charger unit
    Alireza Karamzade 2024
  4. Improving the efficiency of heat exchangers network with Combined Pinch and Exergy Analysis (CPEA): A case study of gas refinery
    Saba Arshizadeh 2024
  5. Molecular dynamics simulation and analysis of the phase change materials behavior inside annular spaces with different cross-sections
    Erfan Zeraati 2024
  6. Thermo, exergy, economic and environmental analysis of solar chimney equipped with Forgo heat exchangers replaced instead of Heller tower in fossil fuel power plant
    Fatemeh Mohammadi 2024
  7. Development of rheological models dependent on time, temperature and pressure of drilling cement
    Mehdi Saffari 2024
  8. Numerical investigation of humidity and condensation reduction in steam turbine blades using hot steam injection and surface heating
    Leyla Iraj 2024
  9. Development of Night Power Generating Device using Radition Cooling and Thermoelectric Generator
    Majid Salehi 2023
  10. Validation, design and construction of air water harvester with energy consumption improvement using peltier and seebeck effects
    Ali Nosrati 2023
  11. Molecular dynamic simulation of melting and solidification process of phase change materials in annular space
    Kiarash Raiszadeh Mousavian 2023
  12. Experimental investigation on heat transfer enhancement and pressure drop in nanofluid flow inside the pipe with deep dimples
    Alireza Khashaei 2023
  13. ?CO?_2 capturing from combustion production of biomass-based CHP power plant for utilizing in a greenhouse
    Seyedeh Pegah Lari 2023
  14. Design and thermo-economic analysis of a multi-purpose power generation system with multi-objective optimization in a gas pressure reducing station
    Amir Qatarani Nejad 2022
  15. Feasibility study of improving the performance of condensers by using novel hydrophobic coatings on the surface of condenser tubes
    Mohammad Nikjah Bakhshayesh 2022
  16. Numerical simulation of non-Newtonian fluid flow using the lattice Boltzmann method with microscale application
    Nima Ramezani 2022
  17. Numerical simulation of corrosion phenomenon in multiphase pipelines
    Mohammad Veyskarami 2022

  18. MohammadAmin Tarahomi 2022

  19. HAMED KAZEMI VARNAMKHASTI 2022
  20. Energy, Exergy and economic analyses of recovery wastewater in a combined cycle power plant and it’s optimization
    Farzad Asadi 2022
  21. Using Thermal waste Energies of Power Plant for Designing a Greenhouse and Energy, Exergy, Economic and Environmental (4E) Analysis
    Ali Saedi 2022
  22. Experimental analysis of a portable atmospheric water generator by thermoelectric cooling method
    Mohammadreza Akbarpour Bazargani 2021
  23. Investigation of the effect of geometric parameters on heat transfer process of PCM in triplex tube heat exchanger
    Ali Moradian 2021
  24. Performance optimization of a single-stage axial compressor with a multi-objective function
    Shahryar Sharifi 2021
  25. Feasibility of increasing the rate of free heat convection within a closed compartment with floor heating using rotation
    Mojtaba Sedaghat 2021
  26. The feasibility and evaluation of the performance of the dry cooler system in thermal power plants by inserting the ACC inside the Heller cooling tower
    Hesel Gharehbaei 2020
  27. Investigation of A novel Hybrid Cooling System(Heller-ACC) and Feasibility, Energy ,Exergy and Economic Analysis Of A Typical Power Plant with new Cooling System
    Reza Alizadeh kheneslu 2020
  28. Feasibility study and Investigation Exergy Economic Analysis of co2 capturing system of the flue gass injection into natural draft dry cooling tower in sample power plant
    Atefeh Sharif 2020

  29. Saman InanlooShavikloo 2019

  30. Mohammad Ahmadi 2019

  31. Mostafa Tahmasbi 2019

  32. Sepideh Zeynalnezhad 2019
  33. Technical Environmental analysis of Production and Consumption and Recycling of Steel in the Community by input-Output Table
    Sattar Zavvari 2019
  34. Numerical analysis of heat transfer from nanofluid flowing in a dimpled tube
    AtaOllah Firoozi 2019

  35. Abbas Arebi 2019
  36. Development and improvement of a semi-empirical friction factor model at the interface between two-phase liquid and gas flow
    Mahdi Gharehasanlou 2018

  37. Arian Gerami 2018

  38. Mehdi Karimi 2018

  39. Keivan Salimi 2018

  40. Arezoo Almasi Sorkhe Mehrai 2018

  41. Samira Mohammadi 2018

  42. Behrooz Adelshahian 2017

  43. AMIN BAKHTIARI 2017

  44. Somayeh Dezham 2017

  45. Behzad Tabrizi Varzeghani 2017

  46. Mohammad Reza Ardekani Fard 2017

  47. Mojtaba Dargahi Kourabbaslou 2016

  48. Nima Tirandaz 2016

  49. Peyman Dorraj 2016

  50. Elnaz Hariri 2016

  51. Zahra Darakeh 2016

  52. Mahyar Seyd Eshaghi 2015

  53. Armin Sargholi 2015

  54. Saeed Akbarnejad 2015

  55. Zahed Besharati 2015

  56. Ahmadreza Farshad 2014

  57. Hamid Mokhtari 2014

  58. Mohammad Jorjani 2014

  59. Mojtaba Yoosefi 2014

  60. Alireza Bafandeh 2014

  61. Mohammad Barzegar Kaliji 2014

  62. Behnam Talaei Dana 2014

  63. Alireza Heydari 2013

  64. Nooshin Enadi 2013