Journal Paper

1. "Buckling Behavior of Dented Underwater Cylindrical Thin-Walled Shells Stiffened by Woven Glass-Epoxy Composite Using Abaqus Plugin for Fitness-for-Service Level Three"
   Vahid Saedpanah, Mohammad Ali Mostafaei, Seyed Houssain Dibajian
   Journal of Pipeline Systems Engineering and Practice, Vol. 16, 2025
2. "Buckling Behavior of Underwater Cylindrical Shells with Dents and Weld Imperfections under External Hydrostatic Pressure Using a Plugin Developed in Abaqus"
   Vahid Saedpanah, Mohammad Ali Mostafaei, Seyed Houssain Dibajian
   Journal of Pipeline Systems Engineering and Practice, Vol. 17, 2025
3. "Development of ABAQUS Plugin Predicting the Mechanical Behavior and Failure Modes of Weft Knitted-Reinforced Composites"
   Elahe Omrani, Seyed Houssain Dibajian, hossein hasani
   FIBERS AND POLYMERS, Vol. 26, pp.883-907, 2025
4. "Stiffening weld repaired buried pipes using glass/epoxy composite layers to enhance buckling resistance under external pressure"
   Vahid Saedpanah, Mohammad Ali Mostafaei, Seyed Houssain Dibajian
   Journal of Solid Mechanics, Vol. 16, pp.486-497, 2025
5. "Compression Load Carrying Capacity of 3D Integrated Pyramidal Knitted Composites: Experimental and Numerical Approaches"
   Elahe Omrani, Hossein hasani, Seyed Houssain Dibajian
   APPLIED COMPOSITE MATERIALS, Vol. 32, pp.1153-1181, 2025
6. "Nondeterministic multi-scale failure analysis in a woven composite fabric with a circular hole"
   Ahmad Kamal, Seyed Houssain Dibajian
   AUT Journal of Mechanical Engineering, Vol. 8, pp.351-372, 2024
7. "Experimental and finite element analysis of utilizing rectangular and trapezoidal piezoelectric energy harvester with arrays of auxetic cells"
   Mohsen Maleki, Seyed Houssain Dibajian, Abbas Rohani Bastami, Majid Rajabi
   MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, Vol. -, pp.1-21, 2023
8. "Influence of Booster's Geometry and Circuit's Resistor on Performance of the Auxetic Energy Harvester - Experimentally Validated Analysis"
   Mohsen Maleki, Seyed Houssain Dibajian, Abbas Rohani Bastami, Majid Rajabi
   Journal of Computational Applied Mechanics, Vol. 4, pp.467-481, 2023
9. "Experimental-numerical study of wrinkling in rotary-draw bending of Tight Fit Pipes"
   Gholamali Naderi, Seyed Ebrahim Moussavi Torshizi, Seyed Houssain Dibajian
   THIN-WALLED STRUCTURES, Vol. 183, 2023
10. "Enhanced Energy Harvesting by Devices with the Metamaterial Substrate"
    A. R. Sangsefidi, J. Kadkhodapour, A. P. Anaraki, Seyed Houssain Dibajian, S. Schmauder
    Physical Mesomechanics, Vol. 25, pp.568-582, 2022
11. "An ABAQUS plugin for rotary draw bending of tight fit pipes"
    Gholamali Naderi, Seyed Houssain Dibajian, Seyed Ebrahim Moussavi Torshizi, Amirreza Masomian, Martin Stockinger
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, Vol. 200, 2022
12. "Experimental-numerical study of residual stress in Tight Fit Pipe"
    Gholamali Naderi, Seyed Ebrahim Moussavi Torshizi, Seyed Houssain Dibajian
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, Vol. 190, 2021
13. "Experimental and numerical investigation of the effect of microstructural changes on the vibrational characteristics of ck35 steel"
    Amirali Amirian, Seyed Ebrahim Moussavi Torshizi, Seyed Houssain Dibajian
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 235, pp.1-14, 2021
14. "Implementation of multiscale modeling and failure mechanism in investigating load bearing capacity of 3D integrated multi-cellular knitted composites"
    Sanaz Hassanzadeh, Reza Jafari Nedoushan, Seyed Houssain Dibajian, Hossein Hasani, Mohammad Zarrebini
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, Vol. 28, pp.1-18, 2021
15. "An Abaqus plugin for evaluation of the Auxetic structure performance"
    A. R. Sangsefidi, Seyed Houssain Dibajian, J. Kadkhodapour, A. P. Anaraki, S. Schmauder, Y. Schneider
    ENGINEERING WITH COMPUTERS, Vol. ., pp.1-24, 2021
16. "Failure analysis and fatigue performance assessment of titanium diaphragms used in sonic soot blowers"
    Mahan Javanmard, Roohollah Sarfaraz Khabbaz, Seyed Houssain Dibajian, Seyyed Majid Yad Avar Nikravesh
    ENGINEERING FAILURE ANALYSIS, Vol. 113, 2020
17. "Comparative analysis of energy absorption behavior of tapered and grooved thin-walled tubes with the various geometry of the cross section"
    A. Asanjarani, A. Mahdian, Seyed Houssain Dibajian
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, pp.1-12, 2018
18. "Multi-Scaled Modeling the Mechanical Properties of Tubular Composites Reinforced with Innovated 3DWeft Knitted Spacer Fabrics"
    Elahe Omrani, Hossein Hasani, Seyed Houssain Dibajian
    APPLIED COMPOSITE MATERIALS, Vol. 25, pp.145-161, 2018
19. "Multi-objective crashworthiness optimization of tapered thin-walled square tubes with indentations"
    ali Asanjarani, Seyed Houssain Dibajian, asghar Mahdian
    THIN-WALLED STRUCTURES, pp.26-36, 2017
20. "Numerical simulating the flexural properties of 3D weft-knitted spacer fabric reinforced composites"
    saba hamedi, hossein hasani, Seyed Houssain Dibajian
    JOURNAL OF COMPOSITE MATERIALS, pp.1-13, 2016
21. ""
    Seyed Houssain Dibajian, محمد گندمكار, Pedram Safarpoor
    Vol. 55, pp.759-772, 2023
22. ""
    سيد حسين ديبايان, مهدي دادخواه, Seyed Houssain Dibajian, سارا هانگيري
    Vol. 31, pp.14-23, 2022
23. "Finite Element Analysis of Metals Fatigue Damage Based on Thermodynamic Entropy models"
    FARSHAD ASNA ASHARI, Seyed Houssain Dibajian, Mohammad Javad Mahmoodi
    Vol. 20, pp.1361-1373, 2020

Conference Paper

1. "An abaqus plugin for homogenization of woven composite fabric"
   Ahmad Kamal, Seyed Houssain Dibajian
   The 8th International Conference on Composites: Characterization, Fabrication and Application (CCFA-8), 2022
2. "Fatigue investigation of metallic diaphragm in sonic soot blower"
   Mahan Javanmard, Seyed Houssain Dibajian, Seyyed Majid Yad Avar Nikravesh
   The Biennial International Conference on Experimental Solid Mechanics (X-Mech-2018), 2018
3. "Brittle fracture of metallic diaphragm in sonic soot blower"
   Mahan Javanmard, Seyed Houssain Dibajian, Seyyed Majid Yad Avar Nikravesh
   The Biennial International Conference on Experimental Solid Mechanics (X-Mech-2018), 2018
4. ""
   Morteza Vahabi khah, Seyed Houssain Dibajian
   The 31th Annual International Conference of Iranian Society of Mechanical Engineers & 9th Conference on Thermal Power Plants, 2023
5. ""
   Gholamali Naderi, Seyed Ebrahim Moussavi Torshizi, Seyed Houssain Dibajian
   The 31th Annual International Conference of Iranian Society of Mechanical Engineers & 9th Conference on Thermal Power Plants, 2023
6. ""
   Ahmad Kamal, Seyed Houssain Dibajian
   The 31th Annual International Conference of Iranian Society of Mechanical Engineers & 9th Conference on Thermal Power Plants, 2023
7. ""
   Ahmad Kamal, Seyed Houssain Dibajian
   20th International Conference of Iranian Aerospace, 2022
8. ""
   Amirali Amirian, Seyed Ebrahim Moussavi Torshizi, Seyed Houssain Dibajian
   , 2019
9. ""
   Negin Rostami, Seyed Houssain Dibajian, Arman Mohseni, Mohammad Javad Mahmoodi
   ISME2019, pp.141-146, 2019
10. ""
    Negin Rostami, Seyed Houssain Dibajian, Mohammad Javad Mahmoodi
    5th International Conference on Applied Research in Electrical, Mechanical and Mechatronics Engineering, 2019
11. ""
    FARSHAD ASNA ASHARI, Seyed Houssain Dibajian, Mohammad Javad Mahmoodi
    , 2018
12. ""
    FARSHAD ASNA ASHARI, Seyed Houssain Dibajian, Mohammad Javad Mahmoodi
    , 2018
13. ""
    ali asanjarani, asghar mahdian, Seyed Houssain Dibajian
    26th Annual International Conference of Iranian Society of Mechanical Engineers ISME2018, 2018
14. ""
    ali asanjarani, Seyed Houssain Dibajian, asghar mahdian
    2nd International onference on New research Achivements in Mechanics Industrial Aerospace Engineering, 2016
15. ""
    Seyed Houssain Dibajian, reza mohebi nodez
    , 2016